Two Wheel Fix

Two Wheel Fix (http://www.twowheelfix.com/index.php)
-   Mechanical or Tech (http://www.twowheelfix.com/forumdisplay.php?f=13)
-   -   Carb cleaning (http://www.twowheelfix.com/showthread.php?t=20200)

askmrjesus 09-21-2011 05:50 PM

Carb cleaning
 
2 Attachment(s)
I don't remember which thread it was, but there was a lot of posting in it about the best stuff to use for cleaning your carbs.

Carb cleaner, as I recall, was an obvious favorite.

Since then, (yesterday actually) I've had an opportunity to try out something I saw on another forum.

Pinesol.

I soaked a thirty year old DellOrto in it overnight. Hit it with a toothbrush, rinsed it out in really hot water, and blew it dry with comp. air.

The verdict... I'm impressed. It's clean as hell, cheap, and you can smoke while you do it.

Before and after:

JC

pauldun170 09-21-2011 08:10 PM

Good to know. I have to clean the carbs on the zx11...might give it a try

Particle Man 09-21-2011 09:10 PM

Pinesol is great for lots of stuff. Between Pinesol and Pledge, I don't generally buy moto-specific cleaners... That reminds me, I need to tear apart my generator and soak the carb (freaking ethanol)

shmike 09-22-2011 12:10 AM

Is that the choke lever the bowl gasket surrounds?

At first glance it looks like you circled it as if to say "Look HERE". :lol:

askmrjesus 09-22-2011 12:46 AM

Quote:

Originally Posted by shmike (Post 491080)
Is that the choke lever the bowl gasket surrounds?

At first glance it looks like you circled it as if to say "Look HERE". :lol:

:lol:

Well, it is sorta perty.

Yeah, I just set the o-ring down first, and the "choke assembly" , (technically it's just a fuel dump valve, as opposed to a choke) fit in it, so...it had to go somewhere.

Fresh rubber bits are due in on Friday, should be on the road Saturday night.

JC

Rangerscott 09-22-2011 01:14 AM

Damn heyzues. I thought you knew everything before everyone.

askmrjesus 09-22-2011 01:31 AM

Nobody likes a know-it-all, so I pretend to be fallible once in a while.

It's a marketing thing.

JC

OneSickPsycho 09-27-2011 01:40 PM

Yeah, I'm thinking I'm going to have to go down this path with the Shadow...

Porkchop 09-27-2011 04:26 PM

I can't remember where I saw the Pinesol method before, but i've never tried it. How does it run right out of the gate???

Shmike, I thought he circled something too. :lol:

askmrjesus 09-28-2011 05:23 PM

Quote:

Originally Posted by Porkchop (Post 491635)
I can't remember where I saw the Pinesol method before, but i've never tried it. How does it run right out of the gate???

Shmike, I thought he circled something too. :lol:

It's running well. I wrote down the number of turns on the mix and idle screws as I took them out, so I had a baseline for sync. I've yet to do a proper sync on it, but it sounds like I've got it pretty close.

JC

Avatard 09-28-2011 08:04 PM

http://1.bp.blogspot.com/-D1EURWnk-o...00/pinesol.jpg

That's the power of Pinesol, baby.

Porkchop 09-28-2011 11:52 PM

Aha... I found where I heard about it. :lol:

http://www.advrider.com/forums/showthread.php?t=560117

askmrjesus 09-29-2011 06:47 PM

Quote:

Originally Posted by Porkchop (Post 491925)
Aha... I found where I heard about it. :lol:

http://www.advrider.com/forums/showthread.php?t=560117

Funny, that's where I saw it too. :lol:

JC

Rangerscott 09-29-2011 11:58 PM

Me three.


http://t2.ftcdn.net/jpg/00/17/69/89/...Yh1qYDIspA.jpg


All times are GMT -4. The time now is 06:15 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.