Two Wheel Fix

Two Wheel Fix (http://www.twowheelfix.com/index.php)
-   Cage Hell (http://www.twowheelfix.com/forumdisplay.php?f=93)
-   -   Adeptus_Minor wants Speed 3 (http://www.twowheelfix.com/showthread.php?t=15348)

Adeptus_Minor 06-17-2010 08:09 PM

Adeptus_Minor wants Speed 3
 
Quote:

Originally Posted by Gas Man (Post 384019)
Well first off good luck finding one. This is the last year for the SS. They stopped taking orders on them in May. So you'll have to find a dealer stocked one.

Well, that sucks... surprised I didn't notice that in my research :(

On the upside, I drove a Mazdaspeed 3 today and loved it. :wink:
Whether I actually end up buying one or not remains to be seen, I need to do some more looking. Still, thanks for the info. :dthumb:

Gas Man 06-18-2010 08:18 AM

The mazda 3 is a nice car. They are built about a mile from my house. I have a few friends that work there and an uncle. My uncle I believe does under body quality checks. Same plant that builds the mustang.

However, you will find that the insurance is going to be higher on that Mazda than the corresponding GM/Chrysler/Ford.

Mudpuppy 06-18-2010 10:41 AM

Quote:

Originally Posted by Gas Man (Post 384435)
The mazda 3 is a nice car. They are built about a mile from my house. I have a few friends that work there and an uncle. My uncle I believe does under body quality checks. Same plant that builds the mustang.

However, you will find that the insurance is going to be higher on that Mazda than the corresponding GM/Chrysler/Ford.

mazda speed3 is better and it is not built by your house.. i had a speed6 and quality wise it sucked ass but performance wise it was great..

Gas Man 06-18-2010 09:19 PM

Is speed 3 the high performence one? They build the mazda 3 in flat rock, don't they? or is it the mazda 6?? I always get those 2 mixed up.

Adeptus_Minor 06-19-2010 07:08 PM

Quote:

Originally Posted by Gas Man (Post 384707)
Is speed 3 the high performence one? They build the mazda 3 in flat rock, don't they? or is it the mazda 6?? I always get those 2 mixed up.

The 6 is built in the US, the 3 is still built in Japan.

Gas Man 06-20-2010 06:33 AM

Quote:

Originally Posted by Adeptus_Minor (Post 384909)
The 6 is built in the US, the 3 is still built in Japan.

Then it's the 6 that is built like 2 miles (if that) from my house. If I go down the street I can see the factory.

Cutty72 06-20-2010 04:46 PM

The speed anything is the performance model. And yes, the 6 is the one made here in the states.

Gas Man 06-20-2010 11:07 PM

Quote:

Originally Posted by Cutty72 (Post 385110)
The speed anything is the performance model. And yes, the 6 is the one made here in the states.

Yep and made down the street from my place.

Adeptus_Minor 06-21-2010 01:12 AM

But the speed3 is the one now parked outside my apartment
If I walk down to the stairwell, I can see it. :D

TommyHotWheel 06-23-2010 09:16 PM

The speed 3 is tight for anything bigger than a teen boy.

Adeptus_Minor 06-24-2010 12:59 AM

Quote:

Originally Posted by TommyHotWheel (Post 386319)
The speed 3 is tight for anything bigger than a teen boy.

I'm 5'10", ~190 and it's not that tight for me. :nee:
Granted, there are a good few teenage boys bigger than me. :lol:

TommyHotWheel 06-25-2010 04:19 AM

Five foot, ten 225 and it was cutting off the circulation in my legs and squeezing my ribs uncomfortably and the console felt as if it was pushing me out the door...even the wife, the car was for her, was not comfortable, at all.

Gas Man 06-25-2010 09:42 AM

split into new thread... you jacking bastards

Adeptus_Minor 06-25-2010 10:53 AM

Quote:

Originally Posted by TommyHotWheel (Post 386731)
Five foot, ten 225 and it was cutting off the circulation in my legs and squeezing my ribs uncomfortably and the console felt as if it was pushing me out the door...even the wife, the car was for her, was not comfortable, at all.

Adjust the seat :nee:

Seriously though, some reviewers did say it wasn't all that comfortable, but I've yet to have a problem with it.
My only sort-of issue is simply one of technique... relearning the art of the smooth launch and seamless upshift.


(oh, and sorry Gas.. didn't mean to make it all about me :whistle:)

TommyHotWheel 06-25-2010 04:06 PM

It launched wonderfully, smooth shifts and cornered like a kart, just a tight cabin to us.

Trip 06-25-2010 04:12 PM

Quote:

Originally Posted by Gas Man (Post 385245)
Yep and made down the street from my place.

Hey is it made down from your place?

Gas Man 06-25-2010 09:08 PM

Quote:

Originally Posted by Trip (Post 386910)
Hey is it made down from your place?

I think it might be made just down the street from my humble abboad

Adeptus_Minor 06-25-2010 10:10 PM

Quote:

The 2010 Mazda3 and Mazdaspeed3 intended for North American sales are built in Hofu City, Yamaguchi, Japan. The Hofu plant is Mazda’s flagship facility where the automaker builds transmissions and the Mazda3, Mazdaspeed3 and Mazda6, however, Mazda6s that are made for the North American market are manufactured in Michigan.

By June 2008, the Hofu plant had produced more than 8 million vehicles and 27 million transmissions since starting operations in 1981.
Now quit jackin' MY thread, bitches :nee::lol:

Chris S 06-28-2010 01:59 AM

Nice bang for the buck, but that's a lot of power for wrong wheel drive. I'd look @ the WRX, the driving experience would be so much better w/ awd.

Adeptus_Minor 06-28-2010 03:16 AM

Quote:

Originally Posted by Chris S (Post 387432)
Nice bang for the buck, but that's a lot of power for wrong wheel drive. I'd look @ the WRX, the driving experience would be so much better w/ awd.

Thought about it, but I'd have had to get the base model WRX to get the price I was looking for.

FWD behavior aside, I've been really happy with the Speed3 so far.


All times are GMT -4. The time now is 08:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.