[05svr650]

Day 2

Starting day 2 was a bit intimidating. I built a stand at work to support the weight of the bike, since I did not have anything above to tie it to.
1. removed gas tank to add some clearance between the bike frame and stand.
2. I used 2 ratchet straps to secure the bike and raise it off the ground.
3. unplugged and removed the fairing stay and gauge cluster.
4. unplugged the speed sensor, this is located just in front of the airbox.
5. remove all controls from clip ons
6. remove steering stem nut and top triple tree
7. remove castle nuts and dust cover
8. now the entire front end should be able to be removed

Time for day 2: 120 minutes