Go Back   Two Wheel Fix > In the Garage or Shop > Mechanical or Tech

Reply
 
Thread Tools Display Modes
Old 07-16-2008, 03:58 PM   #1
Becca_007
Street Stunter
 
Becca_007's Avatar
 
Join Date: Feb 2008
Location: Kalamazoo, MI
Moto: 2003 Kawasaki Z1000
Posts: 93
Default My Gas Cap Won't Unlock

Has this happened to anyone else? I know a couple of times it was real hard to get it to open but right now it will not budge. It's almost like I'm putting the wrong key in the hole. Thought I'd be smart and removed the bolts that appeared to be holding it in place, but that won't let me in either. I've only got 2 bars of gas left and I was suppose to go for a group ride tonight (need to leave in about an hour). Any suggestions? I'm going to try and look in the manual...
__________________
2002 Camaro SS LE: 13.488 @ 102.93MPH
2005 Kawasaki Z750S: 12.239 @ 115.69MPH
2003 Kawasaki Z1000: 11.886 @ 117.72MPH
Becca_007 is offline   Reply With Quote
Old 07-16-2008, 04:01 PM   #2
Rider
Moto GP Star
 
Join Date: Feb 2008
Posts: 12,156
Default

Make sure your key isn't bent and try putting some graphite in the lock. Other than that.. Maybe try your spare key

Good luck.
Rider is offline   Reply With Quote
Old 07-16-2008, 04:05 PM   #3
Becca_007
Street Stunter
 
Becca_007's Avatar
 
Join Date: Feb 2008
Location: Kalamazoo, MI
Moto: 2003 Kawasaki Z1000
Posts: 93
Default

Spare key might be at my mom's house. Grr. I couldn't get there and back and they don't get home til later.

I managed to bend the key trying to get it open but then bent it back. Thing fits in the ignition just fine.

Graphite? Do i just grind up some pencils? Lol.
__________________
2002 Camaro SS LE: 13.488 @ 102.93MPH
2005 Kawasaki Z750S: 12.239 @ 115.69MPH
2003 Kawasaki Z1000: 11.886 @ 117.72MPH
Becca_007 is offline   Reply With Quote
Old 07-16-2008, 04:10 PM   #4
Rider
Moto GP Star
 
Join Date: Feb 2008
Posts: 12,156
Default

Quote:
Originally Posted by Becca_007 View Post
Spare key might be at my mom's house. Grr. I couldn't get there and back and they don't get home til later.

I managed to bend the key trying to get it open but then bent it back. Thing fits in the ignition just fine.

Graphite? Do i just grind up some pencils? Lol.
I'm sure that could work. You don't keep graphite in the locks of your car in the winter? You should.. Unless you have keyless entry.
Rider is offline   Reply With Quote
Old 07-16-2008, 04:31 PM   #5
Becca_007
Street Stunter
 
Becca_007's Avatar
 
Join Date: Feb 2008
Location: Kalamazoo, MI
Moto: 2003 Kawasaki Z1000
Posts: 93
Default

I give up. Tried some WD-40 but it still wouldn't disengage. I'll have to see about getting the other key and hopefully that will work.

Even my old 1990 Lumina had keyless entry . I do remember taking a lighter to the locks of my 1989 Cavalier though.
__________________
2002 Camaro SS LE: 13.488 @ 102.93MPH
2005 Kawasaki Z750S: 12.239 @ 115.69MPH
2003 Kawasaki Z1000: 11.886 @ 117.72MPH
Becca_007 is offline   Reply With Quote
Old 07-16-2008, 06:19 PM   #6
No Worries
Keyboard Racer
 
No Worries's Avatar
 
Join Date: Feb 2008
Location: Mile High City
Moto: Old Superbikes
Posts: 1,016
Default

The best bet is to ride to a locksmith and have him fix it permanently. You don't want to have that happen on empty.
No Worries is offline   Reply With Quote
Old 07-16-2008, 06:48 PM   #7
Becca_007
Street Stunter
 
Becca_007's Avatar
 
Join Date: Feb 2008
Location: Kalamazoo, MI
Moto: 2003 Kawasaki Z1000
Posts: 93
Default

Yay! It finally opened. I won't be able to clean it out and give it a good lubing until after this weekend but now i can gas up so I can ride back and forth to work. WD-40 to the rescue. I still don't know why it happened though.
__________________
2002 Camaro SS LE: 13.488 @ 102.93MPH
2005 Kawasaki Z750S: 12.239 @ 115.69MPH
2003 Kawasaki Z1000: 11.886 @ 117.72MPH
Becca_007 is offline   Reply With Quote
Old 07-16-2008, 06:57 PM   #8
Amber Lamps
Moto GP Star
 
Join Date: Mar 2008
Posts: 14,556
Default

Quote:
Originally Posted by Becca_007 View Post
Yay! It finally opened. I won't be able to clean it out and give it a good lubing until after this weekend but now i can gas up so I can ride back and forth to work. WD-40 to the rescue. I still don't know why it happened though.
That little "door" that used to slide closed when you took your key out probably quit sliding so when you bike gets wet (rain,washing,etc) a little water finds it's way into the hole. You are supposed to lube that hole when you change your oil. Start doing that and this will probably never happen again. Besides the key recess makes a great little pool for water to hang out in and get into your keyhole!
Amber Lamps is offline   Reply With Quote
Old 07-16-2008, 07:46 PM   #9
DLIT
Clit Commander
 
DLIT's Avatar
 
Join Date: Feb 2008
Location: Las Vegas
Moto: 2012 Ducati 1199 Panigale S
Posts: 4,189
Default

I put one on I saw at a gas station just laying on a pump. Dumb move. I pried it off with a prybar really easy.
__________________
Dress for the crash.
Not the ride.

DLIT is offline   Reply With Quote
Old 07-16-2008, 10:40 PM   #10
6doublefive321
Resident Droog
 
6doublefive321's Avatar
 
Join Date: Mar 2008
Location: Northern burbs, Atlanta
Moto: 625 SMC, '08 Tuono R
Posts: 471
Default

My old Zuk was hard to open. The trick was to push down on the cap as you are trying to turn the key. The cap is spring loaded, so it puts a lot of tension on the latch. Pushing down relieves some pressure on the mechanism, and makes it easier for the key to turn.
__________________
I'm sick and tired of being bored.
6doublefive321 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:15 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.