Ok, Here we go. - Page 2

Gunther1000 · 10-03-2008, 08:08 PM

Well, I may have to report back on this one as I plan to test a 60 very soon...

marko138 · 10-04-2008, 01:11 AM

Fuck that 60.

Gunther1000 · 10-06-2008, 10:17 AM

to anyone with a 190 rear If you dont already have the 190/55 vs the 50 your missing out! Big time! That extra turn in is great!

jeeps84 · 10-06-2008, 10:58 AM

Quote:

Originally Posted by Gunther1000

to anyone with a 190 rear If you dont already have the 190/55 vs the 50 your missing out! Big time! That extra turn in is great!

The 50 vs. 55 is a common swap. Not as drastic as 190 to 180 but that can be done too. Just depends what you need from your bike.

Rider · 10-06-2008, 11:00 AM

Quote:

Originally Posted by jeeps84

The 50 vs. 55 is a common swap. Not as drastic as 190 to 180 but that can be done too. Just depends what you need from your bike.

I need 60 degree lean angle at 150mph.

Yeah right.

Gunther1000 · 10-06-2008, 01:54 PM

the profile of a 190 shits on the 180... Been there also. Go with the 190/55 if your looking for win win. No need to rob the contact patch at highway angles. 190 will last and has the same or better profile.

smileyman · 10-06-2008, 02:35 PM

Here we are debating the subtle nuances of which tire size works best with our chassis/suspension and the majority of guys I see riding on the street don't even know which pressures to run...

They don't even seem to mind other than they are black and round...

the chi · 10-06-2008, 03:34 PM

Quote:

Originally Posted by smileyman

Here we are debating the subtle nuances of which tire size works best with our chassis/suspension and the majority of guys I see riding on the street don't even know which pressures to run...

They don't even seem to mind other than they are black and round...

Thats only too true!!

dReWpY · 10-06-2008, 03:36 PM

thats why we discuss it here, ppl might acutally be knowledgeable and have some expericance

smileyman · 10-06-2008, 04:30 PM

Well Itry not to be condesending, BUT...

I recently rode with some liter bike guys (really good riders each one) wearing the latest in DOT race tires and found they had no idea that those tires were crap on the street. We were tearing up some Ozark highways and they were spinning everywhere unable to get them up to operating temperature. They were take offs of their race bikes and had been heat cycled to hell and back and were refusing to heat up even at lower psi on the cool fall highways.

I didn't say anything to them, just smiled smuggly as my 5000 mile old BT021 touring rubber with 36 psi in the rear hooked up and had great traction...I would have hated to have this 180 v 190 or 120/60 v. 120/70 conversation with them.

10-03-2008, 08:08 PM	#11
Gunther1000 Jesus Christ! Join Date: Jul 2008 Moto: (The Chi's lover) Posts: 801	Well, I may have to report back on this one as I plan to test a 60 very soon... __________________ FTP

10-06-2008, 10:17 AM	#13
Gunther1000 Jesus Christ! Join Date: Jul 2008 Moto: (The Chi's lover) Posts: 801	to anyone with a 190 rear If you dont already have the 190/55 vs the 50 your missing out! Big time! That extra turn in is great! __________________ FTP

10-06-2008, 01:54 PM	#16
Gunther1000 Jesus Christ! Join Date: Jul 2008 Moto: (The Chi's lover) Posts: 801	the profile of a 190 shits on the 180... Been there also. Go with the 190/55 if your looking for win win. No need to rob the contact patch at highway angles. 190 will last and has the same or better profile. __________________ FTP

10-06-2008, 02:35 PM	#17
smileyman White Trash Hero Join Date: Mar 2008 Location: NW Arkansas Moto: Buell 1125R Porco Rosso Edition Posts: 4,895	Here we are debating the subtle nuances of which tire size works best with our chassis/suspension and the majority of guys I see riding on the street don't even know which pressures to run... They don't even seem to mind other than they are black and round... __________________ Arkriders.com To be the best you must first be willing to risk the worst!

10-06-2008, 04:30 PM	#20
smileyman White Trash Hero Join Date: Mar 2008 Location: NW Arkansas Moto: Buell 1125R Porco Rosso Edition Posts: 4,895	Well Itry not to be condesending, BUT... I recently rode with some liter bike guys (really good riders each one) wearing the latest in DOT race tires and found they had no idea that those tires were crap on the street. We were tearing up some Ozark highways and they were spinning everywhere unable to get them up to operating temperature. They were take offs of their race bikes and had been heat cycled to hell and back and were refusing to heat up even at lower psi on the cool fall highways. I didn't say anything to them, just smiled smuggly as my 5000 mile old BT021 touring rubber with 36 psi in the rear hooked up and had great traction...I would have hated to have this 180 v 190 or 120/60 v. 120/70 conversation with them. __________________ Arkriders.com To be the best you must first be willing to risk the worst!