Go Back   Two Wheel Fix > In the Garage or Shop > Aftermarket Modding

Reply
 
Thread Tools Display Modes
Old 11-05-2010, 08:09 PM   #1
Gas Man
Trip's Assistant
 
Gas Man's Avatar
 
Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
Default So it starts: Mod Season - Nightster Edition

So I winterized the Nightster Tuesday. Put it over in it's corner



Today is Friday, and so it starts, slow n steady.

On the docket:

Springer Seat abt $500 due to needing a ECM relocation kit.
Tank Rise ($15) Already have riser brackets. HD beer bottle openers
Gloss black powder the engine guard & highway peg brackets
Speed holes in the exhaust heat shields
Ceramic the exhaust pipes, heat shields, and mufflers

So today I decided to start the mocking for the speed holes. It's a theme carried on by the speed holes in the front fender struts and rear belt guard.



The chrome stock form


up close


So the rear pipe was easy. I used a 24mm socket and tried to keep the spacing even, while minding the hose clamp locations


I did the front, minding the clamps, that ended up screwing with my spacing. That seemed to be too many holes in comparison to the rear, which I like.


The clamps were really in the way, but I tried again. This was 7 holes in each heat shield.


But the 2 holes right at the muffler didn't match up with the rear, even though both heat shields are equal in length, the rear looks longer. So I re-did the bottom section, last 3 holes.


I think this is the balance I'm looking for. Agree?


My plans for color is/was/is matte black heat shields against the gray of the motor, matte silver pipe underneath, and matte black mufflers. WAS because with the contrast of chrome mufflers against the blue tape. It makes me think I should go heat shields different color than the mufflers.

silver pipe/black shields/black mufflers
silver pipe/black shields/silver mufflers
black pipe/silver shields/black mufflers

?????

here's another example (right in my own garage) a poster of a chrome/black setup on a nightster.


Spoke it over with the wife, who would have tunk; it is her bike after all. She thinks the heat shields HAVE to be black to off set the motor. But then, perhaps carry the silver pipe into a silver muffler. My option #2 above.
__________________
-Chris



"Why pay somebody else to fuck up your bike?"
Run Amsoil Product
Gas Man is offline   Reply With Quote
Old 11-05-2010, 09:12 PM   #2
Uma
Better half of Gas Man
 
Uma's Avatar
 
Join Date: Jun 2010
Location: SE, MI
Moto: '09 Harley Nightster
Posts: 178
Default

...And he's doing this loaded up on pain killers from having his wisdom teeth yanked out. My poor bike. Tommymac, please stop telling him he can make cocktails with the meds.
Uma is offline   Reply With Quote
Old 11-05-2010, 09:15 PM   #3
Amber Lamps
Moto GP Star
 
Join Date: Mar 2008
Posts: 14,556
Default

What is the finish under the heat shields ? If it is Chrome I'd go with black on the shields unless you want to black out the entire exhaust under the shields...for contrast. Also, you seem to be getting "off plane" with your holes which is causing some of your perspective problems...you might also want to start with smaller holes.
Amber Lamps is offline   Reply With Quote
Old 11-05-2010, 09:26 PM   #4
Gas Man
Trip's Assistant
 
Gas Man's Avatar
 
Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
Default

Currently the pipe under the heat shields is raw metal. So it will have to be coated.

I might be off plane but it's a tight fit in the garage current situation and if I get to far back you won't be able to see my drawn circles.

I thought about hole size changes but that's not in common anywhere else on the bike.
__________________
-Chris



"Why pay somebody else to fuck up your bike?"
Run Amsoil Product
Gas Man is offline   Reply With Quote
Old 11-05-2010, 09:37 PM   #5
Uma
Better half of Gas Man
 
Uma's Avatar
 
Join Date: Jun 2010
Location: SE, MI
Moto: '09 Harley Nightster
Posts: 178
Default

No chrome, no blacking out.
Uma is offline   Reply With Quote
Old 11-05-2010, 09:38 PM   #6
Gas Man
Trip's Assistant
 
Gas Man's Avatar
 
Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
Default

Quote:
Originally Posted by Uma View Post
No chrome, no blacking out.
Yeah... no all black. Definitely want contrast
__________________
-Chris



"Why pay somebody else to fuck up your bike?"
Run Amsoil Product
Gas Man is offline   Reply With Quote
Old 11-05-2010, 11:08 PM   #7
Amber Lamps
Moto GP Star
 
Join Date: Mar 2008
Posts: 14,556
Default

Quote:
Originally Posted by Gas Man View Post
Yeah... no all black. Definitely want contrast
Yea so the pipes get coated black and the already chrome shields get some holes... Are the mufflers shielded as well? If not, you could black coat the exhaust and have the Chrome shields for contrast. I still think several quarter sized holes would look better than a few large holes but that's only an opinion... Besides, we have saying in construction , small holes can be made bigger...

Last edited by Amber Lamps; 11-05-2010 at 11:11 PM..
Amber Lamps is offline   Reply With Quote
Old 11-06-2010, 12:16 AM   #8
dReWpY
RIP REX
 
dReWpY's Avatar
 
Join Date: Feb 2008
Location: Murfreesboro, TN
Moto: 2008 1125R
Posts: 7,467
Default

Quote:
Originally Posted by Amber Lamps View Post
Besides, we have saying in relationships , small holes can be made bigger...
__________________

Venom R1-016 Squadron
Quote:
Originally Posted by Trip View Post
Moral of this story is everyone is fucked up no matter atheist or religious.
dReWpY is offline   Reply With Quote
Old 11-06-2010, 02:19 AM   #9
Gas Man
Trip's Assistant
 
Gas Man's Avatar
 
Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
Default

No chrome. Say it with me. N O. C H R O M E ! ! ! ! ! !
Gas Man is offline   Reply With Quote
Old 11-06-2010, 02:39 AM   #10
Amber Lamps
Moto GP Star
 
Join Date: Mar 2008
Posts: 14,556
Default

Quote:
Originally Posted by Gas Man View Post
No chrome. Say it with me. N O. C H R O M E ! ! ! ! ! !
okay...shiny parts then,,, yeesh. the shields look shiny, ie chrome. whatever. black coat under the shields and blow holes in them
Amber Lamps is offline   Reply With Quote
Reply

Bookmarks

Tags
wrap this


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:21 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.