Bolt Loosener? - Page 2

z06boy · 08-22-2008, 09:04 AM

Quote:

Originally Posted by Ebbs15

PB Blaster... best I've used.

Same here = good stuff !!

MikeSP1 · 08-22-2008, 09:40 AM

Quote:

Originally Posted by Ebbs15

PB Blaster... best I've used.

can't get anything better.

JoJoYZF · 08-22-2008, 10:20 AM

Quote:

Originally Posted by Dnyce

nice avy..

......shes way underage aint she.

Nope, like drewpy said, shes 20. See summer olympic thread, its Alicia Sacromone.

Thanks guys, I should have a rubber mallet sitting around and Ill be lookin for the PB blaster.

Gas Man · 08-22-2008, 12:42 PM

PB BLaster is JAWSOME!!

And yes... WD40 is a penetrating oil not a lubricant!!!

azoomm · 08-22-2008, 01:20 PM

Quote:

Originally Posted by Gas Man

PB BLaster is JAWSOME!!

And yes... WD40 is a penetrating oil not a lubricant!!!

Another vote for PB Blaster

Mr Lefty · 08-22-2008, 08:45 PM

just a tip with PB Blaster... spray it... let it sit... try to loosen... if it doesn't work... spray some more... let it sit... try again... eventually it'll seep in... don't try to FORCE the issue too much...

I had a bolt that we put 150ftlbs of pressure on to loosen... no luck... after trying 3 or 4 times with no luck with the spray sit spray sit... it still wouldn't bust loose... I soaked the fucker over night... came out... and was able to crack the bolt with the 30ftlbs it was supposed to be holding with... and use my fingers to remove it the rest of the way.

just be patient PB Baster won't remove busted bolts

JoJoYZF · 08-22-2008, 08:47 PM

Nice tip ebbs. Got the stuff to work and got my frame sliders put on finally. Even got motivated and tied up some other loose ends with the tail light I put on a little while ago.

Mr Lefty · 08-22-2008, 08:50 PM

that's me... always timely with advice!

JoJoYZF · 08-22-2008, 08:53 PM

Well luckily these ones didnt come to that but Im sure Ill come across some that will eventually.

NONE_too_SOFT · 08-22-2008, 08:56 PM

Quote:

Originally Posted by Dnyce

penetrator-i have a can, its the shit that melts styrofoam cups. cant remember the exact name. that, and a breaker bar. leverage is your friend. if you have a full size jack, take the handle off, slide it on to your rachet and use that. should be easy that way. mite not even need the penetrator

just be sure you've to a good fit on the socket, or you're gonna end up drilling it out.

08-22-2008, 12:42 PM	#14
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	PB BLaster is JAWSOME!! And yes... WD40 is a penetrating oil not a lubricant!!! __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

08-22-2008, 08:45 PM	#16
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	just a tip with PB Blaster... spray it... let it sit... try to loosen... if it doesn't work... spray some more... let it sit... try again... eventually it'll seep in... don't try to FORCE the issue too much... I had a bolt that we put 150ftlbs of pressure on to loosen... no luck... after trying 3 or 4 times with no luck with the spray sit spray sit... it still wouldn't bust loose... I soaked the fucker over night... came out... and was able to crack the bolt with the 30ftlbs it was supposed to be holding with... and use my fingers to remove it the rest of the way. just be patient PB Baster won't remove busted bolts

08-22-2008, 08:47 PM	#17
JoJoYZF Bring on the Zombies! Join Date: Feb 2008 Location: Cleveland Moto: 2000 Yamaha YZF600R Posts: 2,691	Nice tip ebbs. Got the stuff to work and got my frame sliders put on finally. Even got motivated and tied up some other loose ends with the tail light I put on a little while ago.

08-22-2008, 08:50 PM	#18
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	that's me... always timely with advice!

08-22-2008, 08:53 PM	#19
JoJoYZF Bring on the Zombies! Join Date: Feb 2008 Location: Cleveland Moto: 2000 Yamaha YZF600R Posts: 2,691	Well luckily these ones didnt come to that but Im sure Ill come across some that will eventually.