Go Back   Two Wheel Fix > General > News Desk

Reply
 
Thread Tools Display Modes
Old 06-08-2010, 01:47 PM   #1
Homeslice
Elitist
 
Homeslice's Avatar
 
Join Date: Nov 2008
Location: SF Bay Area
Moto: Gix 750
Posts: 11,351
Default

Quote:
Originally Posted by Rider View Post
I can only speak intelligently about the industry I work in, Engineering which this article covers. Not many companies(outside of banking) with highly educated people have shut their doors. There have however been many companies to downsize. Most if not all companies base their layoffs on performance. While they may not admit it, they do, so most engineers that are out of work are out of work because they were in the bottom performing 20%.
Or because the project they were working on was terminated, and their skills were not necessarily transferable to another project?
Homeslice is offline   Reply With Quote
Old 06-08-2010, 01:55 PM   #2
Rider
Moto GP Star
 
Join Date: Feb 2008
Posts: 12,156
Default

Quote:
Originally Posted by Homeslice View Post
Or because the project they were working on was terminated, and their skills were not necessarily transferable to another project?
Rare instance. Engineering companies align processes and procedures. That's half the battle. A EE(Electrical Engineer) is a EE. Sure experience helps but if a EE is on a project that gets canceled, there is a very high likelihood that he will get picked up on another program within the company as long as he is a proven performer.
Rider is offline   Reply With Quote
Old 06-09-2010, 01:37 AM   #3
101lifts2
WSB Champion
 
101lifts2's Avatar
 
Join Date: Nov 2008
Location: Anaheim, CA
Moto: 2009 Kawi ZX6R
Posts: 5,570
Default

Quote:
Originally Posted by Rider View Post
I can only speak intelligently about the industry I work in, Engineering which this article covers. Not many companies(outside of banking) with highly educated people have shut their doors. There have however been many companies to downsize. Most if not all companies base their layoffs on performance. While they may not admit it, they do, so most engineers that are out of work are out of work because they were in the bottom performing 20%.
Seriously...you are wrong. Companies specially do not do this in fear of being sued. Instead they lay off entire departments, some people of which, are highly qualified.

You can be replaced...trust me (with 3 or 4 Middle East Indians lol).
__________________
Train Hard

Ron Paul - 2012

Mark of Excellence
GM
101lifts2 is offline   Reply With Quote
Old 06-09-2010, 09:16 AM   #4
Rider
Moto GP Star
 
Join Date: Feb 2008
Posts: 12,156
Default

Quote:
Originally Posted by 101lifts2 View Post
Seriously...you are wrong. Companies specially do not do this in fear of being sued. Instead they lay off entire departments, some people of which, are highly qualified.

You can be replaced...trust me (with 3 or 4 Middle East Indians lol).
Highly qualified but are making more money than an equally performing lower paid engineer. It's all about value. How much work can i get out an an individual for X dollars. Typically older engineers(non managers) are making a ton of money and have years of experience but are no more valuable than say an engineer with 5 years of experience making 20K less a year. In this economy you have to go with your best bang for the buck and highly qualified engineers may not get you that.
Rider is offline   Reply With Quote
Old 06-10-2010, 08:55 AM   #5
wildchild
cruiser
 
wildchild's Avatar
 
Join Date: Nov 2008
Location: on the run
Moto: '09 HD superglide, 16 Yamaha FZ 09
Posts: 2,749
Default

Quote:
Originally Posted by asphinctersayswhat View Post
Highly qualified but are making more money than an equally performing lower paid engineer. It's all about value. How much work can i get out an an individual for X dollars. Typically older engineers(non managers) are making a ton of money and have years of experience but are no more valuable than say an engineer with 5 years of experience making 20K less a year. In this economy you have to go with your best bang for the buck and highly qualified engineers may not get you that.

just keep in mind that the older engineers can tell the young bucks why they shouldn't try that new fangled way of attaching the widget to the gadget. thereby saving you thousands of dollars in lost time when proto types go boom. our young guns smoke shit all the time here.
wildchild is offline   Reply With Quote
Old 06-08-2010, 02:46 PM   #6
Papa_Complex
Nomadic Tribesman
 
Papa_Complex's Avatar
 
Join Date: Nov 2008
Location: Brampton, Canada
Moto: '09 ER-6n
Posts: 11,150
Default

Quote:
Originally Posted by Rachel View Post
Are you SERIOUS??!!

I know tons of people who cant find a decent job because their company went under. Through no fault of their own they were left jobless and you really want to say something like that Rider?

Not to mention, with enough work experience you cant even get a job in fast food or a crappy admin job etc because you have "too much" experience.
Having had to go through the resumes of people who were barely qualified for "general labour" but who were applying for highly technical positions, I can understand why they would put that rider in. Smart people, who actually have the required skill-set, would likely still apply.
__________________
"Everything's better with pirates." - Lodge, "Dorkness Rising"

http://www.morallyambiguous.net/
Papa_Complex is offline   Reply With Quote
Old 06-08-2010, 01:32 PM   #7
Avatard
Crotch Rocket Curmudgeon
 
Avatard's Avatar
 
Join Date: Nov 2008
Location: Here to integrity
Moto: Li'l red baby Ninja
Posts: 7,482
Default

Rider's on a [t]roll.
__________________
Insert free thought here.
Avatard is offline   Reply With Quote
Old 06-08-2010, 01:44 PM   #8
Homeslice
Elitist
 
Homeslice's Avatar
 
Join Date: Nov 2008
Location: SF Bay Area
Moto: Gix 750
Posts: 11,351
Default

Quote:
"It's our preference that they currently be employed," he said. "We typically go after people that are happy where they are and then tell them about the opportunities here. We do get a lot of applications blindly from people who are currently unemployed -- with the economy being what it is, we've had a lot of people contact us that don't have the skill sets we want, so we try to minimize the amount of time we spent on that and try to rifle-shoot the folks we're interested in."
Yeah that makes sense.



Why place ads at all, then?

If you're only going to consider candidates who you seek out yourself, then don't waste our time by placing an ad for the rest of us to respond to.
Homeslice is offline   Reply With Quote
Old 06-08-2010, 10:34 PM   #9
Captain Morgan
Let's do another U-turn
 
Captain Morgan's Avatar
 
Join Date: Feb 2008
Location: Indiana
Moto: 2009 V-Strom
Posts: 3,816
Default

Quote:
Originally Posted by Homeslice View Post
Quote:
...We typically go after people that are happy where they are...
Yeah that makes sense.



Why place ads at all, then?

If you're only going to consider candidates who you seek out yourself, then don't waste our time by placing an ad for the rest of us to respond to.
No shit. If the people are happy where they are, then they aren't exactly going to be looking at job ads. That's what headhunters are for. Dumbasses.
Captain Morgan is offline   Reply With Quote
Old 06-08-2010, 01:45 PM   #10
Particle Man
Custom User Title
 
Particle Man's Avatar
 
Join Date: Nov 2008
Location: Central NY
Moto: 2003 SV650S
Posts: 14,959
Default

I've seen any number of high performers out of the job because their companies couldn't afford to pay them dude. It's not all performance based.
Keep in mind that a lot of companies not only let people go, the companies themselves folded as well. How's that performance based?
__________________
I'm not "fat."
I'm "Enlarged to show texture."


Handle every stressful situation like a DOG: If you can't eat it or hump it, pi$$ on it & walk away.
Particle Man is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:17 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.