Two Wheel Fix
Page 2 of 3 1 2 3
Show 100 post(s) from this thread on one page

Two Wheel Fix (http://www.twowheelfix.com/index.php)
-   Mechanical or Tech (http://www.twowheelfix.com/forumdisplay.php?f=13)
-   -   Bolt Loosener? (http://www.twowheelfix.com/showthread.php?t=2295)

z06boy 08-22-2008 09:04 AM
Quote:
Originally Posted by Ebbs15 (Post 65712)
PB Blaster... best I've used.
Same here = good stuff !! :dthumb:

http://www.lighthouseind.com/images/..._pbblaster.jpg

MikeSP1 08-22-2008 09:40 AM
Quote:
Originally Posted by Ebbs15 (Post 65712)
PB Blaster... best I've used.
can't get anything better.

JoJoYZF 08-22-2008 10:20 AM
Quote:
Originally Posted by Dnyce (Post 65703)
nice avy..







......shes way underage aint she.
Nope, like drewpy said, shes 20. See summer olympic thread, its Alicia Sacromone.

Thanks guys, I should have a rubber mallet sitting around and Ill be lookin for the PB blaster.

Gas Man 08-22-2008 12:42 PM
PB BLaster is JAWSOME!!

And yes... WD40 is a penetrating oil not a lubricant!!!

azoomm 08-22-2008 01:20 PM
Quote:
Originally Posted by Gas Man (Post 65844)
PB BLaster is JAWSOME!!

And yes... WD40 is a penetrating oil not a lubricant!!!
Another vote for PB Blaster :dthumb:

Mr Lefty 08-22-2008 08:45 PM
just a tip with PB Blaster... spray it... let it sit... try to loosen... if it doesn't work... spray some more... let it sit... try again... eventually it'll seep in... don't try to FORCE the issue too much...

I had a bolt that we put 150ftlbs of pressure on to loosen... no luck... after trying 3 or 4 times with no luck with the spray sit spray sit... it still wouldn't bust loose... I soaked the fucker over night... came out... and was able to crack the bolt with the 30ftlbs it was supposed to be holding with... and use my fingers to remove it the rest of the way.

just be patient PB Baster won't remove busted bolts :lol:

JoJoYZF 08-22-2008 08:47 PM
Nice tip ebbs. Got the stuff to work and got my frame sliders put on finally. Even got motivated and tied up some other loose ends with the tail light I put on a little while ago.

Mr Lefty 08-22-2008 08:50 PM
that's me... always timely with advice!:lol:

JoJoYZF 08-22-2008 08:53 PM
Well luckily these ones didnt come to that but Im sure Ill come across some that will eventually.

NONE_too_SOFT 08-22-2008 08:56 PM
Quote:
Originally Posted by Dnyce (Post 65626)
penetrator-i have a can, its the shit that melts styrofoam cups. cant remember the exact name. that, and a breaker bar. leverage is your friend. if you have a full size jack, take the handle off, slide it on to your rachet and use that. should be easy that way. mite not even need the penetrator
just be sure you've to a good fit on the socket, or you're gonna end up drilling it out.


All times are GMT -4. The time now is 02:49 PM.
Page 2 of 3 1 2 3
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.