STOP-- Do NOT run the bike until this has been checked
Sitting on the bike, under the right side side cover is the two stoke oil injection tank. There is a screen which is in the bottom of the screw on cap.
This ALWAYS clogs up if a bike sits too long. This will not only stop oil flow into the cylinders, it will also end up destroying the crankshaft bearings. ( they are fed oil too )
Take the right side cover off ( where the tach cable goes in ) and gently loosen the main feed line. If you have a steady, constant flow it should be ok. If not, the screen will have to be cleaned.
|