Two Wheel Fix - View Single Post

derf · 09-07-2010, 01:14 AM

That tail light just screams "I am the short bus"

I spent the last 6 hours taking the bike apart and adding a 12v outlet. I would have been done 4 hours ago but I found some frayed/fraying wires so I went through the whole wire harness and found and patched and moved and protected any wire I could see that was rubbing. Just need to figure out how to mount the dashboard with the 12v outlet now. Tommorrow while the bike is apart I am going to bypass the kick stand and clutch kill switches, both have been known to fail eventually on every klr apparently. I'm not going to actually bypass it, just add a jumper in line with the wire that I can just plug together if it ever becomes a problem.

09-07-2010, 01:14 AM	#50
derf token jewboy Join Date: Nov 2008 Moto: CBR 900, KLR ugly ass duckling, Gas Man Posts: 10,799	That tail light just screams "I am the short bus" I spent the last 6 hours taking the bike apart and adding a 12v outlet. I would have been done 4 hours ago but I found some frayed/fraying wires so I went through the whole wire harness and found and patched and moved and protected any wire I could see that was rubbing. Just need to figure out how to mount the dashboard with the 12v outlet now. Tommorrow while the bike is apart I am going to bypass the kick stand and clutch kill switches, both have been known to fail eventually on every klr apparently. I'm not going to actually bypass it, just add a jumper in line with the wire that I can just plug together if it ever becomes a problem. __________________ Last edited by derf; 09-07-2010 at 01:18 AM..