Dear god shoot me now.

JoJoYZF · 11-25-2008, 05:54 PM

Quote:

Originally Posted by Shift

4 hours, One stumped toe, Three fucked up knuckles, One trip to advance auto parts for a filter wrench, and a massively disfigured filter later.....and this SOB still doesn't want to come off.

Stab a hole in it with a screwdriver and use the leverage of that to start spinning it. Ive had to do this on my bike once and the mustang a couple times.

tlstreak · 11-25-2008, 05:56 PM

http://www.sears.com/shc/s/p_10153_12605_00960624000P

Best filter wrench ive ever owned

Rider · 11-26-2008, 08:18 AM

Quote:

Originally Posted by JoJoYZF

Stab a hole in it with a screwdriver and use the leverage of that to start spinning it.

I've done this before.

JoJoYZF · 11-26-2008, 12:48 PM

Quote:

Originally Posted by Rider

I've done this before.

Unfortunately I had to resort to this on my bike filter since the filter wrench U had was too big to grip the filter.

DIMford · 11-26-2008, 01:41 PM

Next time tighten by hand then you can get it off by hand without need of any tools. You don't need them on there any tighter than that anyways.

z06boy · 11-26-2008, 01:50 PM

I've had issues with oil filters before but these seem pale in comparion to what you're going through...when all else fails...just stab it.

Don't forget "lefty loosey"

I think I've maybe only had to do that once in my life as a last resort.

ceo012384 · 11-26-2008, 01:52 PM

Quote:

Originally Posted by DIMford

Next time tighten by hand then you can get it off by hand without need of any tools. You don't need them on there any tighter than that anyways.

Stuff that seals fluid in always gets a little tighter after the engine/fluid gets hot...

z06boy · 11-26-2008, 01:57 PM

Quote:

Originally Posted by ceo012384

Stuff that seals fluid in always gets a little tighter after the engine/fluid gets hot...

True but sounds like a condom commercial.

was92v · 11-26-2008, 07:16 PM

I'm probably just weird, but I use a torque wrench to tighten my filter. It's out of the box anyway for the drain plug.

11-26-2008, 01:41 PM	#5
DIMford Nothing beats the RWB Join Date: Mar 2008 Location: Norfolk, Va Moto: 07 Honda Interceptor Posts: 305	Next time tighten by hand then you can get it off by hand without need of any tools. You don't need them on there any tighter than that anyways. __________________ The Road is a beautiful but dangerous mistress. She'll taunt and tease you with wonderful curves and glorious heights till you lose all control. Then leave you broken and bleeding to tease the next man.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-25-2008, 05:56 PM	#2
tlstreak As Seen On TV Join Date: Nov 2008 Location: NE TN Moto: 01 929 Posts: 54	http://www.sears.com/shc/s/p_10153_12605_00960624000P Best filter wrench ive ever owned

11-26-2008, 01:50 PM	#6
z06boy Letzroll Join Date: Feb 2008 Location: Lake Norman area, NC Moto: 07 Red R1 & 07 Blue R6 Posts: 5,265	I've had issues with oil filters before but these seem pale in comparion to what you're going through...when all else fails...just stab it. Don't forget "lefty loosey" I think I've maybe only had to do that once in my life as a last resort.

11-26-2008, 07:16 PM	#9
was92v Nowhere Man Join Date: Nov 2008 Posts: 558	I'm probably just weird, but I use a torque wrench to tighten my filter. It's out of the box anyway for the drain plug.