Suspension ??

[Trip]

Originally Posted by TIGGER

Hey Trip,when we go to the Gap,I'd like to stop there to have Wheeler double check my settings. Should I make an appointment and if so,do you have the number handy? It's been YEARS since I've been by there,is it the same guys running it all this time?

it's first come first serve

it's one guy, ken wheeler

[rogue]

Hmmm....I know there's probably not much that can be done to my bike, but it would be cool if he'd look at it at least. Tigger, I'll race you to him!

[Amber Lamps]

Originally Posted by Rogue

Hmmm....I know there's probably not much that can be done to my bike, but it would be cool if he'd look at it at least. Tigger, I'll race you to him!

You're on! Loser goes down on the winner!

[Yamerhaw]

Originally Posted by TIGGER

You're on! Loser goes down on the winner!

sounds to me kinda like a "Win Win" situation

[Trip]

Originally Posted by Rogue

Hmmm....I know there's probably not much that can be done to my bike, but it would be cool if he'd look at it at least. Tigger, I'll race you to him!

You would be wasting money with the SV, you need to change the shock and springs to have any kind of impact on it.

[rogue]

Originally Posted by Trip

You would be wasting money with the SV, you need to change the shock and springs to have any kind of impact on it.

I have a rear shock off a gix...just never installed it. According to SVR, I really don't need it for my weight...the stock shock is fine, but needs to be adjusted in properly. My bike is still pretty much on stock settings now.

I do have thicker fork oil. I changed that when I replaced the fork seals.

[smileyman]

Originally Posted by Rogue

I have a rear shock off a gix...just never installed it. According to SVR, I really don't need it for my weight...the stock shock is fine, but needs to be adjusted in properly. My bike is still pretty much on stock settings now.

I do have thicker fork oil. I changed that when I replaced the fork seals.

Prolly, all you'll ever need

[Yamerhaw]

ok, i put a zip tie around my fork to see how much it was travelling and to see if i was bottoming it out, i got on the brakes hard to the point of almost locking up the front wheel, so does this look about right? i've read you want at least 10mm remaining, i have around 15 or so, so i think this part is ok?

[smileyman]

Well it looks fine if that doesn't have you in a coil bind. If that is bottomed out you need more preload.

Really what you need is to go to www.racetech.com and see what they recommend as static sag and loaded sag. You will need a friend and a tape measure. Actually the intsructions are there on the site...

http://www.racetech.com/SubMenu.asp?...howPage=street

[smileyman]

Originally Posted by Rogue

Hmmm....I know there's probably not much that can be done to my bike, but it would be cool if he'd look at it at least. Tigger, I'll race you to him!

Actually Rogue, someone who has some suspension rebuild experience could fix you right up. I had RaceTech put fork spring preload adj. (now stock on the 650) cartridge emulators, stiffer springs, and heavier oil in my front and a FOX Shock in the rear and there was a huge difference to stock. My SV 650 ruled on the bumpy CMRA racetracks!