03 GSXR fan issues

Quick281 · 04-13-2009, 12:41 AM

My 06 Gix had it's fan coming on at like 220 or something like that and then it shut off when the temp reached 212.

To be sure you could just put around a parking lot or let it idle for a while after you have already warmed it up. If it gets too far past 225 without the fan shut her down and start checking stuff.

Frostz28 · 06-23-2009, 10:19 PM

well with work and the weather around here it took awhile but I finally got the bike out for a good ride. it was 101 here today with a heat index of like 115 so the bike warmed up pretty quick, the good news is the fan does work and comes on at 226!

HRCNICK11 · 07-01-2009, 05:07 PM

Just for future ref. you can bypass the switch by grounding the wire on most bikes. This works for checking the fan and or installing a switch.

04-13-2009, 12:41 AM	#1
Quick281 Victim of Blazer Rapage Join Date: Mar 2008 Location: Talkeetna, AK Moto: 06 GSXR 600 Posts: 1,707	My 06 Gix had it's fan coming on at like 220 or something like that and then it shut off when the temp reached 212. To be sure you could just put around a parking lot or let it idle for a while after you have already warmed it up. If it gets too far past 225 without the fan shut her down and start checking stuff. __________________ -Alex- Resident TWFix Noob. My 06 GSXR 600 <-- Its Clickable Fools.

06-23-2009, 10:19 PM	#2
Frostz28 Redneck Join Date: Feb 2009 Location: Dixon, IL Moto: 2005 GSXR 750 Posts: 138	well with work and the weather around here it took awhile but I finally got the bike out for a good ride. it was 101 here today with a heat index of like 115 so the bike warmed up pretty quick, the good news is the fan does work and comes on at 226! __________________ "I refuse to tip toe carefully through life, simply to arrive safely at death" "Guys like me drink to many beers on Friday after work, our best blue jeans have skoal rings, we wear our boots to church"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-01-2009, 05:07 PM	#3
HRCNICK11 Canyon Carver Join Date: Nov 2008 Posts: 429	Just for future ref. you can bypass the switch by grounding the wire on most bikes. This works for checking the fan and or installing a switch.