clutch started slipping today

'73 H1 Triple · 07-19-2009, 11:32 AM

Got my clutch actuator yesterday (ebay) and although it worked just fine, I still had slippage.

Just pulled the clutch cover off, removed the six springs and the outer clutch hub and heard "CLINK" in the oil drain pan.

Turns out the the leaf spring in the hub was in three pieces.
https://www.bikebandit.com/houseofmo.../m4673sch59264
item#39130

Now I have to find a 36mm socket to remove the nut to check if I have to purchase any other parts.

At least it wasn't total catastrophic failure

Jeff

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

07-19-2009, 11:32 AM	#7
'73 H1 Triple restorer of the original Join Date: Mar 2008 Location: Zionsville,PA Moto: '93 ZR1100 &'73 Kawasaki H1 500 Posts: 1,331	Got my clutch actuator yesterday (ebay) and although it worked just fine, I still had slippage. Just pulled the clutch cover off, removed the six springs and the outer clutch hub and heard "CLINK" in the oil drain pan. Turns out the the leaf spring in the hub was in three pieces. https://www.bikebandit.com/houseofmo.../m4673sch59264 item#39130 Now I have to find a 36mm socket to remove the nut to check if I have to purchase any other parts. At least it wasn't total catastrophic failure Jeff