BEHOLD! Another V-Twin Major Rebuild... I give you... Project Pegasus...

[Mr Lefty]

did you finally figure out how to get your bike registered? I thought it was a no go

[OneSickPsycho]

Originally Posted by Ebbs15

did you finally figure out how to get your bike registered? I thought it was a no go

Yeah, there's a nice little loophole... Since I have an out of state salvage title, all I need is the following:

1) an estimate of the repair damages
or
1) pictures of the bike in it's damaged state

and

2) parts lists of all parts repaired or replaced (receipts optional)

Then I take that bitch in to be inspected and it's all good. I CANNOT take in my estimate though, cause it recognizes that the vehicle damage was more than 80% of the value of the vehicle, so they will not even look at it. Pictures on the other hand are A-Ok.

[Mr Lefty]

but wont' they see that the headers are damaged and then see that all you did was wrap them? I'd be eye'n flea-bay

[OneSickPsycho]

Originally Posted by Ebbs15

but wont' they see that the headers are damaged and then see that all you did was wrap them? I'd be eye'n flea-bay

I'm gonna risk it... I won't take in the up close picture that shows the header... You only need a picture of the front, back, and both sides... I will bring some pictures from the day when I crashed, but not one that shows the header well.

The only problem will be this picture, which when shrunk down and printed out shouldn't be too noticeable...


This picture will stay at home:

[Mr Lefty]

wonder if Trip could help you out with photoshop? just to make sure it doesn't show up on the shrunken version?

[Gas Man]

Looks good... you can also take some black heat paint and paint the straps over.

Oh and by the way... those straps SUCK! They will brake later. I suggest standard issue hose clamps.

Oh and on the first time you fire it up... have it outside. They will smoke like a bitch! Run them thru a few heat cycles... the first one shoudl run till they quit smoking then turn them off and let them cool till you can touch them... then run for another cycle... then cool... then you're good to go.

[OneSickPsycho]

Originally Posted by Ebbs15

wonder if Trip could help you out with photoshop? just to make sure it doesn't show up on the shrunken version?

That would be fantastic...

Originally Posted by Gas Man

Looks good... you can also take some black heat paint and paint the straps over.

Oh and by the way... those straps SUCK! They will brake later. I suggest standard issue hose clamps.

Oh and on the first time you fire it up... have it outside. They will smoke like a bitch! Run them thru a few heat cycles... the first one shoudl run till they quit smoking then turn them off and let them cool till you can touch them... then run for another cycle... then cool... then you're good to go.

Yeah, I read that elsewhere... I need to pick up the header wrap sealant stuff anyway, so I'll pick up some hose clamps to finish it off right... I'll make sure to run them through a couple cycles, but from what I've read, they'll probably smoke for longer than two heat cycles...