Using throttle to control cornering arc?

[Sean]

Wait, wut? How so?

I use my body to control the arc--go a little wide and dip the shoulder down to tighten it--but I don't know that I'm consciously controlling the arc with the throttle.

[tached1000rr]

Originally Posted by Sean

Wait, wut? How so?

I use my body to control the arc--go a little wide and dip the shoulder down to tighten it--but I don't know that I'm consciously controlling the arc with the throttle.

Grossly exaggerated here, but need to tighten up arc, carefully chop/reduce throttle input, need to widen arc, give it more throttle, with more throttle the bike wants to come/straighten up.

[CasterTroy]

Originally Posted by tached1000rr

Grossly exaggerated here, but need to tighten up arc, carefully chop/reduce throttle input, need to widen arc, give it more throttle, with more throttle the bike wants to come/straighten up.

Thats bass-ackwards from what I've ever heard/experienced.

If I've overshot a corner, I lean harder and give it gas to tighten it up.

BRAKING makes a bike stand up and want to go straight


Unless I'm totally misunderstanding the original statement

[OTB]

Yes, grabbing brakes will stand the bike up; but we're not talking about braking; we're talking about decreasing or increasing throttle (speed) mid-turn. You don't believe me? Next time you go for a ride find a nice, long constant radius turn, pick a constant speed, and then roll off the throttle without changing anything else; the bike will tighten up it's turning radius; and the converse is also true.

Don't take my word for it...go try it out.....

[OTB]

http://www.msgroup.org/forums/mtt/to...p?TOPIC_ID=311

And a little more math for high-speed turns:

http://www.physicsforums.com/showthread.php?t=88999

And this paper, which is primarily concerns itself with the role of yaw inputs, but explains and models the 6 forces (not including rider position, which is actually a seventh parameter) in the complex role of turning a motorcycle.

http://www.dinamoto.it/DINAMOTO/8_on...ringtorque.htm

[CasterTroy]

Look.....I paid this Asian enough to buy himself high for a month so I could pass physics III, and struggled enough with dynamics and earned a degree in Architectural Engineering to NEVER make provisions in life to EVER revisit complex dynamics/math

As long as YOU have it all figured out, I’m golden

[Tmall]

Originally Posted by OTB

http://www.msgroup.org/forums/mtt/to...p?TOPIC_ID=311

And a little more math for high-speed turns:

http://www.physicsforums.com/showthread.php?t=88999

And this paper, which is primarily concerns itself with the role of yaw inputs, but explains and models the 6 forces (not including rider position, which is actually a seventh parameter) in the complex role of turning a motorcycle.

http://www.dinamoto.it/DINAMOTO/8_on...ringtorque.htm

How come none of that takes into account weight transfer and suspension movement? It's always been my understanding that letting off the throttle upsets the suspension and loads the front wheel. The weight transfer and centrifugal force is what causes the bike to go wider.

As well, while decelerating, you're still carrying forward velocity which causes the bike to want to go to the outside of the corner. How would you transfer that force by decelerating ?

[smileyman]

When i want to tighten my line I simply hang my balls off the inside of the bike. My scrotum acts as a sail and....OOOO shuthefuckup!

Really guys why get heated. Lets just discuss. dont assume street or track. We all know you want a smooth increase in throttle from apex to exit on track. But we can all share without shouting down anyone elses ideals.

[OTB]

Originally Posted by Tmall

How come none of that takes into account weight transfer and suspension movement? It's always been my understanding that letting off the throttle upsets the suspension and loads the front wheel. The weight transfer and centrifugal force is what causes the bike to go wider.

As well, while decelerating, you're still carrying forward velocity which causes the bike to want to go to the outside of the corner. How would you transfer that force by decelerating ?

Re: weight transfer. Remember what I said: using SMALL inputs...."Depending on the bike, when I'm droning down the road from point A to B, I rest my throttle-hand index finger on the throttle housing; I can then use the support to fine-tune both my speed and arc through turns without making gross changes.....the name of the game is SMOOOOTH......."

Slamming shut the throttle will definitely upset things, no doubt about it....we're talking FINE THROTTLE CONTROL... for fine adjustments. Not hobby-horsing down the road.

Argue with me if you want, but it is what it is....go TRY IT.

Cheeze. Same crap happened in the clutchless downshifting thread.....

[Speedracer42]

Originally Posted by OTB

Yes, grabbing brakes will stand the bike up; but we're not talking about braking; we're talking about decreasing or increasing throttle (speed) mid-turn. You don't believe me? Next time you go for a ride find a nice, long constant radius turn, pick a constant speed, and then roll off the throttle without changing anything else; the bike will tighten up it's turning radius; and the converse is also true.

Don't take my word for it...go try it out.....

Your theory is speed dependent. If you are going to call people out for making posts that are relevent to the track, then you need to clarify wtf you are talking about. Me, I don't do much street riding and don't care to. But I can assure you as I approach T1 at my home track from a terminal velocity of over 170mph and intiate turn in at over 100 if I roll off the throttle and leave it off the last thing that is gonna happen is that my turn will magically tighten. The bike won't like that at all.