Both Blinkers blink when i turn on a turn signal

[Full Throttle]

Originally Posted by Papa_Complex

You should get something like the item pictured, in order to add a fuse between the battery and your 12V power outlet, that you stated you had added under the seat with a switch. Make sure that the positive 12V is the side with the fuse. If you've never seen an automotive batter discharge directly to ground then trust me, it isn't something that you want going on directly under your ass, while riding

Originally Posted by Kerry_129

I know all this babbling is making it sound more complicated than it really is - hell, if you were closer to Nashville I'd say just bring it on over & I'd help you square it away.

Edit: Oh - and a BIG plus-one on adding an inline fuse to the power outlet. Attach one lead to the batt, and the outlet to the other, so the circuit is protected closest to the source.

The switch and 12v outlet under the seat already has a fuse in line. That whole set up was rather easy. It goes bat-fuse-switch-outlet-ground. the only reason i have the switch there is so i wouldn't have to link everything into the existing electrical system. so i made my own. The switch is there to keep the battery from dying.

I would of liked it if someone on here lived a bit closer so i could just swing by one after noon and fix it up.