Minor Winter Project - installing suspension worth 1/3 of the bike

Papa_Complex · 04-11-2011, 06:08 PM

Damper rod and spring assemblies above the forks.

Bitubo cartridge inserts below the forks.

Cap, locking nut, spring, and spacer have to come out, before securing the damper. Oil level has to be measured without the spring in place.

Then Loctite (blue), copper washer, bolt, and impact in to spec.

And ready to be filled, reassembled, and capped for installation.

04-11-2011, 06:08 PM	#11
Papa_Complex Nomadic Tribesman Join Date: Nov 2008 Location: Brampton, Canada Moto: '09 ER-6n Posts: 11,152	Damper rod and spring assemblies above the forks. Bitubo cartridge inserts below the forks. Cap, locking nut, spring, and spacer have to come out, before securing the damper. Oil level has to be measured without the spring in place. Then Loctite (blue), copper washer, bolt, and impact in to spec. And ready to be filled, reassembled, and capped for installation. __________________ "Everything's better with pirates." - Lodge, "Dorkness Rising" http://www.morallyambiguous.net/ Last edited by Papa_Complex; 04-11-2011 at 08:39 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode