Go Back   Two Wheel Fix > In the Garage or Shop > Mechanical or Tech

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-08-2009, 07:33 PM   #2
JoshuaTree
DILLIGAF?
 
JoshuaTree's Avatar
 
Join Date: Nov 2008
Location: Austin, Texas, USA, Earth, Sol, Western Spiral Arm, Milky Way
Moto: 1993 K75SA
Posts: 483
Default

1) First, remove the battery, fully charge it (trickle charger, overnight - also fill up any cells that are low with distilled water beforehand [assuming its not a sealed battery]), and then take the battery in to be tested to see if its good or bad.

A bad/marginal battery cell can 'appear' to be a charing system issue.

If the battery tests OK, then you need the shop manual for the bike. You'll test the output of the stator/rotor assembly, This critter puts out alternating current (AC). You'll measure the voltage between all of the sets of wires - usually three (the manual will have the value to test for). If that tests fine, you can either just try a new regulator or simply take the old one in to a shop to be tested.

"Normal" charing system output is 1-2VDC above the "resting", fully charged battery voltage for your bike.

YMMV... :shurg:
__________________
"Quis custodiet ipsos custodes?"
"Learn to do the counter-intuitive things that may one day save your ass..."
"... Love Much, Laugh Often..." - Amanda Kay Corso (January 18, 1980 - April 15, 2008)
JoshuaTree is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:15 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.