Gear Navigator Tailbag

derf · 01-23-2009, 10:11 PM

From the right side, Plenty of room for me, and I could adjust it further back if I want to.

In this one you can see where I attached the front strap, the other side is the same. I would prefer to attach it a little further down, but it keeps up and I think it might come loose if i try to strap it anywhere but as tight as I can.

In this exquisite photo you can see how it sits on top of my seat, and the cigs are there for size comparrison. The bag is packed with a few days worth of dirty laundry. Plus there is room left. Also if you look closely you can see where the buckles just miss going under the seat, and where I have the rear straps routed.

You can see in this photo how far off the buckles are away from my body work, my early fears of the buckles rubbing were not founded.

The picture under the seat. I tried to hook to the small hooks under the seat, I eventually decided that they are good for small trips holding down a light load, this is just too big and requires a sturdy tie down. This one also shows the large velcro strap that goes under the seat.

This last picture is where I wound up attaching the straps to, a cross brace between the two sides of the subframe. I dont know how strong the metal is that it is wrapped around, that bracket holds the rear lock in place, and I dont want that thing moving around which means that I wont be able to open the seat, like when I first bought the bike.

01-23-2009, 10:11 PM	#10
derf token jewboy Join Date: Nov 2008 Moto: CBR 900, KLR ugly ass duckling, Gas Man Posts: 10,799	From the right side, Plenty of room for me, and I could adjust it further back if I want to. In this one you can see where I attached the front strap, the other side is the same. I would prefer to attach it a little further down, but it keeps up and I think it might come loose if i try to strap it anywhere but as tight as I can. In this exquisite photo you can see how it sits on top of my seat, and the cigs are there for size comparrison. The bag is packed with a few days worth of dirty laundry. Plus there is room left. Also if you look closely you can see where the buckles just miss going under the seat, and where I have the rear straps routed. You can see in this photo how far off the buckles are away from my body work, my early fears of the buckles rubbing were not founded. The picture under the seat. I tried to hook to the small hooks under the seat, I eventually decided that they are good for small trips holding down a light load, this is just too big and requires a sturdy tie down. This one also shows the large velcro strap that goes under the seat. This last picture is where I wound up attaching the straps to, a cross brace between the two sides of the subframe. I dont know how strong the metal is that it is wrapped around, that bracket holds the rear lock in place, and I dont want that thing moving around which means that I wont be able to open the seat, like when I first bought the bike. __________________