96 suzuki katana 600 - Page 2

baby Ray · 04-17-2009, 12:05 AM

Quote:

Originally Posted by marko138

Remove headers? No way. Shouldn't have to. I'm guessing it's b/c of the oil filter. You should be able to get to it w/o removing headers. Put some foil down to reduce the amount of oil that drips all over the place.

maybe these are not stock pipes but no way that filter was coming off, still had thread to go and was tight against the pipes

marko138 · 04-17-2009, 09:30 AM

Quote:

Originally Posted by baby Ray

maybe these are not stock pipes but no way that filter was coming off, still had thread to go and was tight against the pipes

It should slide right between cylinders 3 and 4. Barely but it should. Do you have an aftermarket exhaust? Actually...mine was a full Vance and Hines...so I did have aftermarket headers.

ZUKIMON · 04-18-2009, 12:20 AM

My '03 Can-a-tuna held 1 gallon (4 quarts) exactly.

It was a 600, btw. Been told time and time again, that more or less, for every 1000 ml that is listed on the case cover, it's basicaly a quart of oil. That's been damned close thus far.

04-18-2009, 12:20 AM	#13
ZUKIMON Is this thing on? Join Date: Feb 2009 Location: Ashe Co, NC (Near Boone) Moto: '01, 929RR Posts: 398	My '03 Can-a-tuna held 1 gallon (4 quarts) exactly. It was a 600, btw. Been told time and time again, that more or less, for every 1000 ml that is listed on the case cover, it's basicaly a quart of oil. That's been damned close thus far. __________________ Dirty Harry said there's nothing wrong with a little shooting, as long as the right people get shot.