"Oreo Face Cam": Body Positioning demo vid.

OreoGaborio · 10-18-2008, 04:15 PM

Thanks, dude.

The problem w/ the fender is sometimes they're a little flimsy & the camera can shake around a bit. Usually under the nose, slightly off-set from center (so the fender doesn't come up & hit it when you compress the suspension) is a good place. Then there's always the old standby of putting it on the tank looking through the windscreen.

A buddy of mine records all his races & he's got his on his side fairing in a super tough bullet cam housing. Give a cool view, but isn't all that crash-worthy even w/ the sturdy housing.

10-18-2008, 04:15 PM	#6
OreoGaborio Tony's Crack Pusher Join Date: Aug 2008 Location: Topsfield MA Moto: 2003 Aprilia Tuono (street/track days), 2006 SV650 (race) Posts: 428	Thanks, dude. The problem w/ the fender is sometimes they're a little flimsy & the camera can shake around a bit. Usually under the nose, slightly off-set from center (so the fender doesn't come up & hit it when you compress the suspension) is a good place. Then there's always the old standby of putting it on the tank looking through the windscreen. A buddy of mine records all his races & he's got his on his side fairing in a super tough bullet cam housing. Give a cool view, but isn't all that crash-worthy even w/ the sturdy housing. __________________ -Pete LRRS/CCS#187 ECK-Racing, Ironstone Ventures, Tony's Track Days, SV Racer Pine Motorparts/PBE Specialists \| Phoenix Graphics \| Woodcraft \| Moon Performance \| RJ's Motorsport \| Motorcycles of Manchester \| MTAG-Pirelli The Garage: '03 Tuono (Hooligan bike :naughty) \| '06 SV650 (race)